Updating your Wattbike using an iOS or Android device with nRF connectUpdated 17 days ago

Only use the below guides if you have been advised by Wattbike to do so or if you are certain this process is required to update the firmware on your bike. 

Use the attached guide (located at the bottom of this article) and relevant firmware to update your Wattbike.

Please note: New Wattbikes may have a different firmware installed to that which is on your Wattbike. Any firmware updates will be pushed through via the Wattbike hub app if and when available for your Wattbike model. Until then, there is no requirement to update the firmware on your Wattbike. Firmware archives can be accessed here.

Before starting the update process, ensure you have downloaded the firmware and know where it is stored on your device. The Wattbike you would like to update should be connected to mains power and turned on.

This should be a quick process although it will differ between different devices. Following the upload, restart your Wattbike and the Hub App on your device. Your Wattbike is now ready to use.

 Updating your Wattbike using an iOS device

Updating your Wattbike using an Android device

If after following the above process, your Wattbike still does not work - contact our support team.