Only use the below guide if you have been advised by Wattbike to do so or if you are certain this process is required to update the firmware on your bike.
Use the attached guide (located at the bottom of this article) and firmware to update your Wattbike.
Before starting the update process, ensure you have downloaded the most recent firmware and know where it is stored on your device. The Wattbike you would like to update should be connected to mains power and turned on.
This should be a quick process although it will differ between different devices. Following the upload, restart your Wattbike and the Hub App on your device. Your Wattbike is now ready to use.
If after following the above process, your Wattbike still does not work - contact our support team
at info@wattbike.com or call on 0115 9455450.
Comments
0 comments
Article is closed for comments.