Sometimes you may need to pair the shifters on your Wattbike Proton, for example, if you have changed the batteries.

If you have followed the instructions below and cannot get the shifter to pair, you may need to replace the battery within the shifter. To do this please follow the instructions on the article How do I change the shifter batteries on my Wattbike Proton

How to pair your shifters: 

iOS Device

1. Make sure Bluetooth is enabled on your phone or tablet
2. Make sure your Proton is plugged in and turned on
3. Open the Wattbike Hub app
4. Go to the 'Settings tab' on the bottom navigation, then select 'Known Wattbikes'
5. Select the serial number of your Proton
6. After the app has connected to your Proton (after a few seconds the ring will turn green); click 'Show advanced settings'
7. Be ready to hold all three buttons of your shifter down
8. Click 'Pair New (Right or Left) Shifter' for the shifter you want to pair (only pair one shifter at a time)
9. Hold down all 3 buttons on the shifter for 20 seconds
10. No pop-up notification will be displayed on screen but you will notice the 'Status' value will change to 'Connected' and your shifter will now be paired
11. Repeat the above steps to pair the second shifter if needed

Android Device

1. Make sure Bluetooth is available on your phone or tablet
2. Make sure your Proton is plugged in and turned on
3. Open the Wattbike Hub app
4. Select the overflow menu on the top right-hand corner (3 dots)
5. Select 'Known Wattbikes'
6. Select the serial number of your Proton
7. After the app has connected to your Proton (after a few seconds the ring will turn green), click 'Show advanced settings'
8. Click 'Pair New (Right or Left) Shifter' for the shifter you want to replace (only pair one shifter at a time)
9. Hold down all 3 buttons on the shifter for 20 seconds
10. No pop-up notification will be displayed on screen but you will notice the 'Status' value will change to 'Connected' and your shifter will now be paired
11. Repeat the above steps to pair the second shifter if needed