The Wattbike Air is designed to require minimal maintenance and should withstand heavy usage. However, the moving parts inside a Wattbike are subject to wear through use. If you notice any unusual symptoms, such as loud noises or grinding during operation, stop using your Air and contact Wattbike for support.
Before your session, we recommend putting a small towel on the handlebars to catch any sweat.
After Every Session
To ensure your Wattbike Air stays in good condition, remove all sweat, dust, dirt, or other substances by using a clean, soft cloth and a non-abrasive antibacterial liquid cleaner. We recommend using the Muc-off Care Pack.
Do not spray any cleaner directly onto the bike, always spray into the cloth first. Wipe down the exterior covers and frame, saddle, handlebar, cranks and base.
Weekly Maintenance
Vacuum the floor under and around the Wattbike.
Inspect the feet bolts, saddle and handlebar sliders and pedals for looseness. Tighten as necessary.
Inspect the saddle and handlebar stem adjustments. Tighten as necessary.
Ensure that no sweat/liquid is pooling on the metalwork or covers.
Monthly Maintenance
Check for smooth and quiet operation of all moving parts.
Comments
0 comments
Article is closed for comments.