Getting started with your Wattbike Air

This guide shows you how to build and set up your Wattbike Air, how to connect to your devices, and how to get the most from your Air’s features.

GET READY TO RIDE

BUILD
1 Cut away the side of the box and remove all of the components and the bike.

2 Check you have all components ready to assemble:

Tools:
– 6mm Allen key
– 15mm pedal spanner
– 14 + 17mm spanners

Components:

3 Raise the rear of the bike using the cardboard packaging and attach the rear stabiliser (no wheels) using a 6mm Allen key and a 17mm spanner. Complete the same process for the front stabiliser (with wheels).

4 Attach the saddle slider (1) to the seat post using the horizontal adjustment lever (2) – ensure the dimple plate (3) and split washer (4) are used in the position pictured. Once this is complete, attach the saddle with saddle clamp (5) to the slider, using a 14mm spanner to tighten.

5 Attach the handlebars with the slider attached (1) to the handlebar stem (2), using the horizontal adjustment lever (3) – ensure the dimple plate (4) and split washer (5) are used in the positions pictured.

6 Attach the pedals provided (or replace with your own) using the 15mm pedal spanner provided. Take care not to cross thread.

7 Adjust the handlebar stem, handlebars, seat post and saddle slider into your desired riding position. 

8  Plug in your Air using the provided USB-C power supply only.

GET CONNECTED

Once your Wattbike Air is set up, you will need to link your devices before you can start riding.

1 Ensure your phone or tablet’s Bluetooth™ is turned on.

2 Download the Wattbike Hub app from your app store.

3 Open the app and login or sign up. To connect your Air:
• tap Quick Ride or the workout you’d like to do
• tap Wattbike in the top right corner
• select your Air ID from the list.
• you may be asked to complete a firmware update on first connection. Follow the on-screen instructions.

4 Connect your heart rate monitor. The Air can connect to Bluetooth™, ANT+ and ANT (Suunto) heart rate monitors. They can be paired to the Wattbike Hub before starting your session or during your session when paused.

You can connect to other training apps via Bluetooth™ or ANT+, including:

 WARNING

– The appliance is only to be used with the power unit provided.
– This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
– Children shall not play with the appliance.
– Cleaning and user maintenance shall not be made by children without supervision.