PTS2 Change Log and Downloads

Installation

App and firmware on the PTS2 can be update separately or together.

• Place the required app and/or firmware versions from the table below on a USB-C stick (FAT32 formatted)
• Plug the USB stick into the PTS2's USB port underneath the middle hardware button*
• If the app or firmware version on the stick is newer than the version currently installed on the PTS2 you will be prompted to install the new app, and once this is completed you will be prompted to install the new firmware

TIP: A right-angle adapter can make this quicker

Force an Update or Backdate to an earlier Version

• To force an update, or to backdate a version, change the version portion of the file name to 'force', as per the following example:
  • Original: wb_pts2_v10025.pkg
  • New: wb_pts2_force.pkg
• Plug the USB stick into the PTS2 port underneath the middle hardware button
• You will be prompted to install the new app, and once this is completed you will be prompted to install the new firmware

NOTE: Take care to match compatible app and firmware versions

Change Log and Downloads