The Pro/Trainer comes with Wellgo E148 pedals as standard, however, it has a standard pedal fitment so you can fit your own pedals.
Please see below for instructions on how to change the pedals on your Wattbike Pro/Trainer.
Tools required
6mm Allen key or 15mm pedal spanner
1. Use a 6mm Allen key or a 15mm pedal spanner to remove the right-hand pedal. Hold the pedal still, position the tool parallel to the floor and push down toward the back of the bike. This will require some force as the pedal attachments can be quite stiff.
2. Repeat the step above to remove the left-hand pedal. Please note this is a left-hand thread.
3. To replace, reverse the process, ensuring the pedals are fitted tightly. This action should feel smooth. If you experience any resistance, it means the pedal has been cross-threaded and you will need to start this step again.
Note: Check the pedals after 1-2 days to ensure they are still tightly fitted.
Comments
0 comments
Article is closed for comments.