Setting Zero State Model A

Whilst the Wattbike is factory calibrated there is a function to Set zero from the Model A monitor. This can be used to ensure that the Wattbike has been returned to zero prior to testing.

  1. Select Setup from the Main menu, then Memory and simultaneously press all four buttons.
  2. Rotate the pedals backwards for a few revolutions to unload the Wattbike. The cranks should be unladened and in a horizontal position.
  3. Press ENTER – the monitor will automatically Set Zero.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.