How to connect your Wattbike Atom to Rouvy

Please see below for our instructions on how to connect your Wattbike Atom to Rouvy:

  1. Turn on your Wattbike Atom.
  2. Launch the RouvyAR app on your smart device.
  3. Choose a route from the ride section.
  4. Click on the 'Connect Sensors' button in top left of the screen.
  5. The RouvyAR app will search for all available connections and will try to connect automatically.
  6. Check the 'Power Source', 'Cadence' & 'Controllable' sensors list and make sure the correct Wattbike serial number is connected (if not, click 'change' and choose another from the list). 
  7. If any sensors aren't connected click the green 'Connect' button to search for them manually. 
  8. Click the 'X' in the top right of the screen to close the Cycling Devices screen.
  9. The black box in top left corner should now show live power and cadence values.
  10. Press the green 'Start' button to begin your ride.

rouvy.jpg

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.