How do I pair shifters on my Atom?

Sometimes you may need to pair the shifters on your Wattbike Atom, for example if you have ordered replacement shifters. Follow the steps outlined below to pair your shifters: 

iOS Device

  1. Make sure Bluetooth is available on your phone or tablet
  2. Make sure your Atom is plugged in and turned on
  3. Open the Wattbike Hub app
  4. Go to the 'Settings tab' on the bottom navigation, then select 'Known Wattbikes'
  5. Select the serial number of your Atom
  6. After the app has connected to your Atom (after a few seconds the ring will turn green) click 'Show advanced settings'
  7. Be ready to hold all three buttons of your shifter down, adjust the hood covering the shifter if needed.
  8. Click 'Pair New ... Shifter' for shifter you want to replace (only pair one shifter at a time)
  9. Hold down all 3 buttons on the shifter for 20 seconds. No notification will be displayed on screen however your shifter will now be paired and you should go to the Just Ride screen to check this. 
  10. Repeat the above steps to pair the second shifter if needed

Android Device

  1. Make sure Bluetooth is available on your phone or tablet
  2. Make sure your Atom is plugged in and turned on
  3. Select the overflow menu on the top right hand corner (3 dots)
  4. Select 'Known Wattbikes'
  5. Select the serial number of your Atom
  6. After the app has connected to your Atom (after a few seconds the ring will turn green) click 'Show advanced settings'
  7. Click 'Pair New ... Shifter' for shifter you want to replace (only pair one shifter at a time)
  8. Hold down all 3 buttons on the shifter for 20 seconds.
  9. The 'Status' value will change to 'Connected' and you should go to the Just Ride screen to check this. 
  10. Repeat the above steps to pair the second shifter if needed
Var denna artikel till hjälp?
0 av 0 tyckte detta var till hjälp
Har du fler frågor? Skicka en förfrågan

Kommentarer

0 kommentarer

Artikeln är stängd för kommentarer.