Charging your PTS2Updated 3 days ago

The battery indicator is in the top left corner of the screen. You can check exactly how much battery is remaining by clicking on the symbol to see the percentage of charge. It will also show if the battery is currently charging. 

If the battery starts to get low, the screen may power down sooner after inactivity or may not turn on. In this case it can be charged externally. This is done with the USB C cable provided, plugged in to the port at the bottom of the screen, beneath the centre button. You can plug this in to any normal phone/tablet charger at the mains, using any USB C cable. It should take around 8 hours for a full charge from flat using this method. You can remove the screen from the bike to make this easier. Instructions for doing this can be found here

It is also recommended to ensure the firmware and app are kept updated. You can check the current firmware version here. If you need any help completing this update, instructions can be found here. 

On an Air-Pro, the PTS2 will charge directly through the bike while the bike is being pedalled, via the bike's internal generator; the higher the cadence and power, the greater the rate of charge. Regular use of the bike should keep the screen charged for several months on its own.

Charging will not occur for the PTS2 when pedalling on an AtomX as there is no generator system inside the bike for this to work.

If you have any trouble completing the updates or your screen does not turn on after an external charge, contact your Wattbike Sales advisor or our customer support team at [email protected]