Pro/Trainer: Troubleshooting
Technical support for the Wattbike Pro/Trainer
Model B Monitor - Setting zero state
Whilst the Wattbike is factory calibrated there is a function to Set zero from the Model B monitor. This can be used to ensure that the Wattbike has been returned to zero prior to testing. Please see below instructions on how to Set Zero State. Pleas
The levers on my Wattbike Pro/Trainer are not tightening
If you are experiencing issues with the levers on your Wattbike Pro/Trainer you will need to purchase replacements. The lock lever adjusts the height of the handlebars/saddle. The adjustment lever adjusts the handlebars/saddle fore/aft. Please contac
The magnetic resistance control on my Wattbike is slipping
The magnetic resistance works by creating resistance against the flywheel through the use of magnets at the end of the resistance column. Over time, if the magnetic column has been left for a long period under tension, then the column can loosen and
My Wattbike Pro/Trainer will not connect to TrainerRoad
If you have the latest firmware on your Wattbike Performance Monitor (latest firmware can be found here) and TrainerRoad cannot detect the Monitor when searching via Bluetooth, follow these steps and it will solve the issue;